INSTALLATION INSTRUCTIONS FOR T3 / T3X NEXTGEN TRG BOTTOM METAL
T3 / T3x nEXTgen TRG Bottom Metal
Our SAKO/TRG Magazine Compatible Bottom Metal is designed as a custom fit and requires installation by a gunsmith for both stock inletting and adjustment of the magazine retaining lever. This model comes either pre-assembled or unassembled.
This model is too wide to fit in the factory stock and requires an aftermarket stock with a width of 1.75. At the present time, stock makers are not offering stock inletting for this model; however, stocks that have been inletted for CDI bottom metal can have the width increased to accept this model.